Clara independently completed the full startup sequence and produced test prints, demonstrating proficiency in the boot-up logic.
Trained on inputting consumable costs into the software to calculate per-sample production costs, enabling accurate client quotations.
Mastered the "Media Settings" module and understood the correlation between material parameters and printing bias voltage.
All members practiced adjusting the bias voltage to optimize output based on specific media characteristics.
Learned to adjust toner dispense speed and drum rotation speed via IOT settings when encountering errors. All members completed hands-on practice to resolve related exceptions.
Critical: Use only an air blower for cleaning. Never use soft cloths, as they can damage the blade edge.
Clara and Carol performed practical cleaning, mastering non-abrasive techniques.
Trained on standard procedures for removing, cleaning, and reinstalling the waste toner unit.
Crucial Step: Always shake the toner bottle thoroughly before installation to ensure even distribution and prevent density inconsistencies.
Always press both the "Feed Unload" and "Take-up Unload" buttons when changing media. This is a frequent step missed by clients and must be emphasized during training.
Check and adjust the Rewind Diameter setting first.
When switching to a different width, manually execute the Web Guide (Centering) function to ensure proper media alignment.
0574-87476008 
English
